Warning: count(): Parameter must be an array or an object that implements Countable in /home/cse01use/public_html/wp-content/themes/fixology/inc/tools.php on line 90

Rain Gutter Ice Dams

If you have rain gutters on your home and you live in a climate where the temperature drops below freezing, you can have a problem with ice dams. When the temperature freezes, the snow or ice in your gutters can freeze solid, blocking the path for runoff. When the weather warms up enough to melt the ice, the top layer will melt first and back up onto the roof. If there is a freeze again, the ice and water can go underneath the shingles or other roofing material you have on your roof. When this happens, the water can leak into the house, which will in turn cause water damage to your insulation, ceilings and walls. There are a few products on the market that can help prevent this problem and by preventing ice dams, you will save money by preventing costly water damage inside your home. nice prevention tool is the use of heat tapes. This is a set of tape or cables that include electric heating wires that go along the edge of your roof just above the gutters and in the gutter itself. The heat will keep the snow and ice freezing solid and building up, in and around the gutters. The heating wires also help keep the gutters working properly by eliminating water from backing up onto the roof. KEY TAKEAWAYS:
  • The first way to prevent this damage is to make sure you have proper insulation and ventilation in your attic.
  • Your roofing contractor can help you to assess the potential problems with ice dams.
  • Proper prevention of your investment will save you a lot of money and heartache from the elements.

  • "Having the right system in your attic will help eliminate hot spots on the roof that will allow the snow and ice up there to melt unevenly."

    Original Source: http://www.homeimprovementcorner.com/gutter_ice_dam.php


    Warning: count(): Parameter must be an array or an object that implements Countable in /home/cse01use/public_html/wp-content/themes/fixology/inc/tools.php on line 90